Select Page

To Revolve Objects About an Axis to Create a …

Click Solid tabCreate panelRevolve. Find Select a closed object to revolve. To set the axis of revolution, specify one of the following: The start and endpoint. Click to points on the screen to set the axis orientation. The axis points must be on one side of the revolved object. The positive axis direction extends from the start point to the endpoint. The X, Y, or Z axis. Enter x, y, or z. An …

Source: knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2015/ENU/AutoCAD-Core/files/GUID-36BDF296-1501-4F67-9AA6-48BB8E4B7D77-htm.html

SOLIDEDIT (Command) | AutoCAD 2016 | …

Rotates one or more faces or a collection of features on a solid about a specified axis. You can change the shape of the object by rotating its faces. This option is recommended for minor adjustments. Select faces (rotate) Rotates the face according to the specified angle and axis. In the drawing area, select one

Source: knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2016/ENU/AutoCAD-Core/files/GUID-D54C266B-2B68-4660-ACA5-0579432F149C-htm.html

Unable to revolve the selected object – …

Any one know how to solve this problem Command: revolve Current wire frame density: ISOLINES=4 Select objects: 1 found Select objects: Specify start point for axis of revolution or define axis by [Object/X (axis)/Y (axis)]: x Specify angle of revolution <360>: The object should be on one side of the axis. Unable to revolve the selected object.

Source: forums.autodesk.com/t5/autocad-forum/unable-to-revolve-the-selected-object/td-p/1980036

Object Polygon in AutoCAD – how to build it in …

AutoCAD object Polygon. Polygon command. How to build a polygon in AutoCAD using a point of the center and the radius of an inscribed or circumscribed circle, or draw a polygon in the program using end points of one side. Article. Video.

Source: drawing-portal.com/en/creation-of-objects-in-autocad/polygon-in-autocad.html

Chapter 4 – Dimensioning Drawings

finished, you should have a drawing similar to the one shown on the right. The other vertical edges in the right view can be created with the OFFSET command. This command will duplicate a line at a specified offset distance. Enter Offset Specify offset distance: <0.0>: 3 Select object

Source: www.unm.edu/~bgreen/autocad/Autocad%204.pdf

Rotating your UCS | AutoCAD Tips

2/22/2011 · The 3rd click specifies which side of the new X axis will the Y axis be facing. The cursor (cross-hairs) should now be aligned with the new specified angle (as seen below) You can work this way and Ortho will draw lines accurately lined up with this new angle, but you may start to tilt your neck or got sick of the way it looks.

Source: autocadtips1.com/2011/02/22/rotating-your-ucs/

Solids of a Constant Width With AutoCAD : 21 …

To 3D print we need to export this solid in exactly the same way as the previous one: 1) select the object. 2) click the big AutoCAD A in the top left corner of the display and click export and then scroll down to other formats. 3) then save as SolidOfAConstantWidth2.stl . Now you should have a file ready to be sliced for 3D printing.

Source: www.instructables.com/Solids-of-a-constant-width-with-AutoCAD/

AutoCAD tutorial 01: Drawing your first object

1/2/2020 · 2 – Click anywhere in the drawing area to tell AutoCAD where you want the first point to be. 3 – Repeat the previous step after moving the cursor away from the first point. 4 – Press the ESC key on your keyboard to cancel the command.. If you have more than a line to draw, you don’t have to start each by starting all over again.

Source: tutorial45.com/autocad-tutorial-01-drawing-your-first-object/

How to put a texture on one side of the object …

10/24/2011 · something you should know is that you need first to apply some material to whole object, create a new one which will be assigned to the side only. lf l understood correctly what you want , then you first should select the face that is what you call "side" ,after that assign the material you want by right click on the material -just created …

Source: forums.autodesk.com/t5/maya-shading-lighting-and/how-to-put-a-texture-on-one-side-of-the-object/td-p/4225113

Object snap and how to use it in AutoCAD

Select the object snap that you want to activate from this list and then AutoCAD will only snap to the point selected in the override menu. This method is faster and efficient then deactivating all the snaps that you don’t need and keeping only the required one active from the object snap menu.

Source: www.thesourcecad.com/object-snap-autocad/